The correct operating sequence for a high-speed blister packaging machine is as follows:
- During production, the appearance quality of the finished aluminum-plastic products and the machine's operation must be checked frequently. If any abnormality is found, stop the machine immediately for inspection. Production can only resume after the machine is functioning normally.
- Prepare the medicines and packaging materials, replace the batch number template, install the PVC and aluminum foil, check the cooling water, and thoroughly clean the equipment.
- When the predetermined temperature is reached, press the start switch. The main unit will rotate clockwise, and the PVC will sequentially pass over the PVC heating roller, the feeding hopper, the aluminum foil heating roller, the tensioning wheel, the batch number device, and the punching die.
- In the design of food machinery for safety and hygiene, the safety design must first take direct safety measures to eliminate potential hazards in food production and ensure a high level of safety in food machinery production.
- When the power supply is turned on, connect the compressed air.
- Press the heating button and adjust the heating and heat-sealing temperature controllers to the appropriate temperatures.
- From the perspective of indicative safety measures and additional preventative measures, compensate for the deficiencies of direct safety measures to ensure that the safety and hygiene design of the food machinery meets actual production needs and avoids the existence of hazardous factors.
- Pull the PVC rigid sheet through the channel to the cutting blade, and pull the aluminum foil to the heat-sealing plate; When the heating plate and heat-sealing plate reach the appropriate temperature, adjust the cooling temperature gauge to the appropriate temperature (generally 30℃).
- Independent PID temperature control is better suited for various packaging materials. The transmission system is simple, more reliable in operation, and easier to maintain. High-sensitivity photoelectric eye color mark tracking and digital input of sealing and cutting position ensure more accurate sealing and cutting.
